Laser Cutting Machine is a machine that uses high-powered lasers to cut materials. A high-density beam is created by stimulating the laser material with electrical discharge within a closed container. Optics are used to focus the resulting laser beam onto the workpiece, effectively cutting by melting, evaporating or burning. It is very necessary to keep the Laser Cutting Machine in good condition during daily use.
Check seals and components
Check seals around key parts of Laser Cutting Machine for wear or damage. Low temperatures may exacerbate existing problems and cause leaks or failures.
Lubrication
Cold weather causes lubricants to thicken, making it difficult for moving parts to operate smoothly. Please regularly lubricate all moving parts with a suitable lubricant that is still effective in low temperatures.
Replace filters
Filters need to be replaced more frequently in winter because in winter, there is no ventilation in the room, and more dust and debris will be generated and circulated, which will clog the filter and affect performance.
Drain cooling water
One of the most critical aspects of winter maintenance is managing the cooling system of the Laser Cutting Machine. Water freezing in the pipes can cause serious damage.
Monitor water temperature
Keep a close eye on the temperature of the cooling water circulating in the system. Ideally, the water temperature should be kept above freezing (0°C) to prevent solidification.