The laser cutting machine focuses the laser emitted by the laser into a high power density laser beam through the optical path system. The laser beam shines on the surface of the workpiece to make the workpiece reach the melting point or boiling point, while the high-pressure gas coaxial with the beam will blow away the molten or vaporized metal.
With the movement of the relative position of the beam and the workpiece, the material finally forms a slit, so as to achieve the purpose of cutting.
Laser is defined as "light amplified by excited emission of atoms". Next, let's briefly understand this sentence one by one.
Here, "atom" refers to the smallest unit that constitutes "worker (medium)", just as cells are the smallest unit that constitutes human tissues.
According to different states of working materials, lasers can be divided into the most basic and simple: solid, gas, liquid, semiconductor and free electron lasers.
Laser cutting is a material processing technology, which uses high power density laser to irradiate the material to be cut, so that the material can be heated to the vaporization temperature in a very short time, thus forming very narrow holes to complete the cutting.
Features of laser cutting machine:
1. Ultra low cost, laser power consumption per hour is only 0.5-1.5 degrees; It can blow air to cut various metal sheets.
2. High performance, imported original packaged light intensity laser, stable performance, service life up to 100000 hours.
3. High speed and high accuracy, the cutting speed of thin plates can reach 10 meters per minute.
4. The laser of the optical fiber cutter is maintenance free.
5. The cutting edge is of good quality, small deformation, flat and beautiful appearance.
6. Imported guiding transmission mechanism and servo motor are adopted, with high cutting accuracy.
7. It can design various graphics or characters at will and cut them in real time. It is simple, flexible and convenient to operate.
The main working principle of the laser cutting machine is to produce laser through the high-pressure laser, and to achieve the goal of cutting metal and non-metallic materials with the moving mechanical system. The cut patterns and effects are controlled by the computer, so as to achieve the goal of automatic processing. The laser cutting machine makes full use of the laser beam to process raw materials. A series of changes such as melting, gasification and fracture of raw materials are produced by laser. After the material absorbs the laser energy, the processing material will be cut off. At present, most of the CO2 laser sources are used, with operating power ranging from hundreds of watts to thousands of watts. However, the power value is relatively low. After specular reflection, the laser beam will be highly concentrated, and then the material will be melted. At present, laser cutting machines are widely used in China's industrial field.
The main working principle of the laser cutting machine is to produce laser through the high-pressure laser, and to achieve the goal of cutting metal and non-metallic materials with the moving mechanical system. The cut patterns and effects are controlled by the computer, so as to achieve the goal of automatic processing. The laser cutting machine makes full use of the laser beam to process raw materials. A series of changes such as melting, gasification and fracture of raw materials are produced by laser. After the material absorbs the laser energy, the processing material will be cut off. At present, most of the CO2 laser sources are used, with operating power ranging from hundreds of watts to thousands of watts. However, the power value is relatively low. After specular reflection, the laser beam will be highly concentrated, and then the material will be melted. At present, laser cutting machines are widely used in China's industrial field.
XT Laser always takes customers as the center, and constantly promotes the construction of laser industry service functional area and service platform. While improving product performance, we will continue to improve user experience and improve user services.
Time change is a touchstone. Today's market has carried out an "open book examination" for each enterprise, which is intended to test the details and quality of the enterprise, especially in the unstable stage, to make a direct and fundamental test on the stage description, decomposition steps, organizational support and operation control of the enterprise's strategic objectives. Strategic planning is the choice, and focusing on implementation is the key. The market will always give the most generous returns to the strong people who actively respond, just as XT Laser constantly strengthens itself, breaks the cocoon of adversity, stretches its wings and soars in XT.
